Standard (Only 10 Remaining) ($15.31/Each)x10 $153.10
1.00MM Oversize (Out of Stock)
ENGINETECH P3057
Point to Zoom
Standard
ENGINETECH P3057 Specifications
Alloy
Hypereutectic
Bore Diameter
3.551
Bore Diameter
90.20
Clearance
0.0010
Compression Height
1.210
Height
0.350 IN
Oil Ring Thickness
3.00 MM
Piston Compression Ratio
9.0:1
Piston Pin Outside Diameter
0.8662
Recess
0.068 IN
Second Compression Ring Thickness
1.50 MM
Top Compression Ring Thickness
1.50 MM
Hypereutectic; Floating Pin; Coated Skirt
Enginetech pistons are manufactured with state of the art materials to match OE requirements.
Features:
Made from Hypereutectic alloy for increased strength and scuff resistance over cast pistons
Skirt coated for longer life and increased horsepower
Machined (where appropriate) for a very smooth finish
Includes a mechanism to enable oil distribution for pin lubrication to prevent them from locking up (pin starvation of oil is one of the leading causes of engine failures)
All oil return slots are chamfered to prevent stress cracking from forming at any unfinished angles
Why Choose Enginetech Pistons?
Attention California Customers - Warning: This product may expose you to chemicals including lead and nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
OEM / Interchange Numbers: H829CP, H885CP
ENGINETECH Warranty Information:Stock / Standard Replacement Parts: 12 months / 12,000 miles; High Performance Parts: No WarrantyWarranty Details