OE Equivalent Vented Rotors; With NAO Ceramic Pads
Brembo Premium Ultraviolet (UV) Coated OE Replacement Brake Rotors are finished with a UV coating that is designed to guarantee superior corrosion resistance and full protection of the rotors. These rotors are designed to meet or exceed the performance of the original equipment rotors that came on your vehicle.
Rotor Features & Benefits:
The Salt Spray Chamber test shows rotors that are UV coated resist corrosion better than the standard of most car manufacturers
The UV coating metallic effect gives the rotor a brilliant and clean appearance
UV coating on the braking surface and the outer diameter assures complete protection of the rotor
The UV coating process does not require any solvents, making it extremely efficient from an energy point of view
Solid in construction, each rotor is vented to dissipate heat evenly and efficiently
Machined and tested for a secure fitment
Assembled and carefully tested to endure rigorous road conditions
Durable construction for repetitive usage and extended life
Pad Features & Benefits:
Specially designed NAO ceramic compound virtually eliminates brake dust
Each set of pads contain multi-layer ESE (Elastomer – Steel – Elastomer) red shims to minimize vibrations and noise
Additional noise dampening is performed by the backing plate which also acts as a heat shield to reduce heat transfer
Pads are thermal scorched to minimize running-in and fading
A positive molding process uses extreme pressure to compress friction materials and provide balanced bonding to the backing plate
Installation Tips
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Before installing the rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
Apply brake lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function