DAYCO 71581
|
|
$16.37
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$16.37
Total
|
|
|
|
DAYCO 71581 Specifications |
---|
Color | Black | Contains Heat Shield | No | Contains Protective Sleeve | No | End 1 Inside Diameter (IN) | 1 5/16 | End 2 Inside Diameter (IN) | 1 11/32 | End 3 Inside Diameter (IN) | 3/4 | Hose Type | Branched Hose | Material | EPDM | SAE Specification | SAE J20R4 Class D-1, SAE J1684 Type EC | Trunk Height (IN) | 13 |
|
|
Designed to replace original equipment manufacturer hose, Dayco Molded Radiator and Bypass Hose is built with knitted reinforcement and EPDM construction which provides high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40F (-40C) to +257F (+125C) that are required for OEM hose replacements.
Features & Benefits:
- The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
- Meets SAE J20R4 EC, Class D-1 requirements
Service Tip: Squeeze along the hose and feel for inconsistencies; replace any hose that is soft, spongy or crunchy.
![](/Images/MoreInfo/bulb.png) Signs it is Time to Replace Your Radiator Hose(s) Prevent system contamination and coolant leaks that could cause your engine to overheat by checking for these common signs of Radiator Hose damage / failure:
INTERNAL DAMAGE |
Soft / mushy hose ends, usually about 2 inches from the clamp.
Internally Damaged Hose |
LEAKAGE |
Moisture, drips or coolant bleed marks on or around the hose clamps, connectors or hose.
Leaking Hose |
HEAT DAMAGE |
Slight swelling, or a hardened, glossy cover that is covered with cracks.
Heat Damaged Hose |
OZONE DAMAGE |
Tiny, parallel cracks in the cover, usually at hose bends.
Ozone Damaged Hose |
ABRASION DAMAGE |
Rubbing marks on, or damage to the hose cover.
Abrasion Damaged Hose |
OIL CONTAMINATION |
Soft or spongy to the touch - bulges and swelling are readily apparent.
Oil Contaminated Hose |
![](/Images/MoreInfo/install.png) Cooling System Maintenance | Tips & Tools Without regular maintenance, cooling system components will degrade and fail prematurely, which can lead to costly engine damage. Protect your engine with simple preventative maintenance:
- Completely drain and flush the system using Cooling System Flush prior to installation. Flushing the system is critical to prevent system contamination and failure.
- Consider replacing the Thermostat and Radiator Cap as part of routine preventative maintenance. System contamination can cause these parts to degrade and fail over time, which can lead to severe engine damage from overheating.
- Refill radiator with fresh Coolant / Antifreeze according to the volume and formula specified in your Owner's Manual. Inspect levels and condition every year.
![](/Images/MoreInfo/doc.png) Additional Resources Hose Replacement Tips
|
OEM / Interchange Numbers: 10145729, 22568673 |
Closeout Inventory Warranty Information:Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).Regular Inventory Warranty Information:12 Months/12,000 Miles |
|