|
FVP 14165108
|
|
$96.99
Price
|
$100.00
Core
|
+ Sold in packs of 1x1
Pack
|
$196.99
Total
|
|
|
|
|
|
| FVP 14165108 Specifications |
|---|
| Abutment Clips Included | Yes | | Bare Bracket Weight lbs | 9.05 | | Bare Caliper Body Weight lbs | 20.50 | | Bleeder Install Thread Count in | 4.5 | | Bleeder Screw Included | Yes | | Bleeder Screw Thread Diameter | 0.375 in | | Bleeder Screw Thread Size | 3/8"-24 | | Body Air Gap | 86.0mm | | Bracket # | 743.65107 | | Bracket Air Gap | 45.0mm | | Caliper Casting Material | Cast Iron | | Caliper Color | Gray | | Caliper Manufacturer | TRW | | Caliper Type | Floating | | Casting Number | 66; 2B294/302B; 2B134B; 0077; K361I; 188853 | | Inlet Fitting Type | Banjo | | Inlet Thread Diameter | 0.375 in | | Inlet Thread Size | 3/8"-24 | | Mount Spread - Ctr2Ctr | Inner = 250.0mm, Outer = 327.0mm | | Mount Thread Size mm | M16-2.00 | | Mounting Bracket Included | Yes | | Mounting Hardware Included | No | | Pad Wear Sensor Included | No | | Pads Included | No | | Piston Diameter | 66.000 mm | | Piston Diameter | 2.598 in | | Piston Material | Phenolic | | Piston Quantity | 2 | | Published Bore Size | 66 | | Rust Preventative Coating | Yes |
|
|
FVP Friction Ready calipers are remanufactured to meet ensure predictable and reliable performance while providing long service life.
Features:
- 100% pressure tested and inspected to guarantee proper operation and fitment
- All guide bolts, pins and seals are replaced, guaranteeing the caliper will function correctly
- Hardware and brackets included (where applicable) to facilitate an easy installation
- Brake pads not included
 Installation Tips - Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
- Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
- Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
- Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
- After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
- After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid
|
Warranty Information:Limited Lifetime |
|
