BENDIX SDR5698
|
|
$87.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$87.79
Total
|
|
|
|
BENDIX SDR5698 Specifications |
---|
Bolt Circle (MM) | 135 | Bolt Hole Diameter (MM) | 16.20 | Bolt Holes | 6 | Center Hole Diameter (MM) | 90.10 | Discard Thickness (MM) | 32 | Nominal Thickness (MM) | 34 | Outside Diameter (MM) | 350 | Overall Height (MM) | 49.50 | Vented or Solid | Vented |
|
|
Fleet MetLok; Severe Duty |
Bendix Fleet MetLok is a severe duty line of brake pads and rotors designed specifically for applications like towing, heavy hauling and frequent stopping. The line also offers comprehensive coverage for pursuit vehicles providing them with excellent performance and noise-free operation.
Features & Benefits:
- Built to withstand severe duty performance demands with superior thermal stability and strength
- High Carbon content provides better performance in aggressive braking, heat dissipation and sound dampening
- SurfaceLok™ Coating is heat resistant and extends rotor life by limiting corrosion build-up
- OEM driven machining specifications allow smooth pad-to-rotor contact, improving pedal response for safe driving in all conditions
- Made from alloyed carbon performance rotor castings
![](/Images/MoreInfo/install.png) Installation Tips - Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
- Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
- After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
- Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
- Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
- Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
- After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Attention California Customers - WARNING: Cancer and Reproductive Harm
|
BENDIX Warranty Information:12 months/12,000 miles |
|