Brake Pads are sold as a set. Quantity of one (1) is for both wheels
POWER STOP PST1001 Specifications
Brake Lubricant Included
Yes
Chamfered Edges
Yes
Friction Material Composition
Metallic
Friction Surface Scorched
Yes
Inner Pad Overall Thickness (MM)
13.4
Mounting Hardware Included
Yes
Outer Pad Overall Thickness (MM)
13.4
Pad Shims Included
No
Pad Wear Sensor Included
Yes
Pad Wear Sensor Type
Mechanical
Slotted
Yes
Track Day
If you drive your street-driven vehicle on a road race circuit for a "Track Day" or HPDE, you certainly know the importance of quality brake pads. Power Stop Track Day Brake Pads are perfect for the entry level track-day enthusiast. The Power Stop research and development team spent countless hours matching the right pad compound to each individual vehicle platform so you don't have to spend countless track days figuring it out yourself. These platform-specific brake compounds have an excellent coefficient of friction and resist fade during the rigors of just about any track day.
Features:
Recommended for beginning track day enthusiasts
Carbon-Fiber/Metallic formulation for extreme fade resistance at high speeds
High coefficient of friction when cold, and an even higher coefficient of friction when hot
Consistent pedal feel at every corner, giving you confidence and control
Power Stop is the Official Brake Supplier of Radford Racing School (formerly Bondurant)
Installation Tips
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Attention California Customers - WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds), Antimony oxide (Antimony trioxide), and Nickel (Metallic), which are known to the State of California to cause cancer, and Chromium (hexavalent compounds) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.harm (For more information go to www.p65warnings.ca.gov)
Installation Tips