PROFESSIONAL PARTS SWEDEN has been a supplier of aftermarket parts for SAAB & Volvo cars for the past 30 years. Their dedicated team of engineers and innovators is constantly evaluating and testing new ideas to provide quality replacement parts. Furthermore, some of ProParts products were contracted directly by SAAB for use as original equipment replacement (OEM) parts.

How To Determine Stabilizer (Sway) Bar Diameter

To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.

1. Use a digital caliper or micrometer for a precise reading
2. Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
3. Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.