FRAM
More Information for FRAM HM8A
Continue Shopping
 
FRAM HM8A  
$5.38
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$5.38
Total
FRAM HM8Aclose
<
>
Part image
FRAM HM8A Specifications
Anti-Drain Back ValveYes
Attachment TypeSpin-on
Burst Pressure230.000 PS
Bypass Relief ValveYes
Bypass Relief Valve Setting12.000 PS
Filter Media MaterialCellulose/Synthetic Blend
Filter TypeSpin-On Canister
Height5.105 IN
Housing ColorOrange
Inlet TypeThreaded
Inside Thread Diameter3/4-16
Marine ApprovedNo
Micron Rating8.000 Mi
Non Slip GripYes
Outside Diameter3.797 in
Thread SizeStandard
Torque NutNo
High Mileage; Spin-On
FRAM® High Mileage® For vehicles with over 75,000 Miles
  • Industry exclusive, patented time-released gel additive conditions oil through the entire change cycle
  • Gel additives balance oil PH and maintain viscosity
  • Ideal for older engines that are more susceptible to oil break-down
  • Uses cellulose and synthetic glass blended media to provide 3X MORE engine protection than the average of leading economy oil filters
  • 95% Dirt Trapping Efficiency
How It Works
  1. Dirty oil enters the filter
  2. The oil passes through the media where it's filtered with 96% single pass efficiency
  3. The TRT™ additive gel is time released into the filtered oil
  4. The additive dissolves slowly into the oil
  5. The treated oil flows back into the engine to protect against corrosive wear, deposits and viscosity build-up
Which Oil Filter Is Right For You?

Driving Style
Filter Type Oil Change Intervals Normal City / Highway Heavy Traffic Dirty / Dusty Conditions Extreme Weather Towing
Economy
3,000 - 5,000 Miles        
Standard Replacement
OEM Recommended    
High Performance / Heavy Duty
OEM Recommended

Oil Change Toolbox

Installation Instructions
  • Check owner's manual for correct oil specification, viscosity, and amount. Purchase oil by year, make, and model, or under the Tools & Universal Parts tab on RockAuto.com
  • Wear proper protective gear (safety glasses, gloves, long sleeve shirt) to protect skin and eyes from hot oil.
  • Place a Drain Pan under the crankcase and carefully open drain plug to drain oil. When oil is fully drained, reinstall drain plug on the oil pan.
  • Position the drain pan under the oil filter. Unscrew oil filter (using a Filter Wrench, if necessary).
  • Clean mounting base, making sure the O-ring from the old filter is not stuck to the filter mount.
  • Apply film of clean oil to filter gasket.
  • Screw new filter on until gasket reaches base contact, then tighten filter to manufacturer specifications.
  • Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
  • Shut off engine and recheck oil level after 5 minutes. Top off as necessary.
It is illegal to dispose of used oil or oil filters in a sanitary landfill or public waterway. Many towns have free hazardous waste drop-off sites, which a quick internet search will help you find.
OEM / Interchange Numbers: HM8ADP

FRAM Warranty Information:
Filters - Vehicle Manufacturer's Recommended Service Intervals
Hard Parts - 12 Months
Warranty Details