RAYBESTOS
More Information for RAYBESTOS 580279P
Continue Shopping
 
RAYBESTOS 580279P  
$70.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$70.79
Total
RAYBESTOS 580279Pclose
<
>
Part image
Sold Individually
RAYBESTOS 580279P Specifications
ABS Sensor Ring IncludedNo
Discard Thickness (IN)1.102
Discard Thickness (MM)28.000
Mounting Bolt Hole Quantity6
Nominal Thickness (IN)1.181
Nominal Thickness (MM)30.000
Outside Diameter (IN)12.990
Outside Diameter (MM)329.950
Overall Height (IN)2.185
Overall Height (MM)55.500
Rotor TypeConventional
Solid Or Vented Type RotorVented
Wheel Bolt Circle Diameter (IN)5.500
Wheel Bolt Circle Diameter (MM)139.700
Wheel Bolt Holes6
Specialty - Police Disc
Law enforcement agencies demand performance, stealth and dependability in the patrol vehicles they operate on city streets. Raybestos® Police Rotors are engineered for superior performance and deliver unmatched stopping power, cooling properties and noise control.

Features & Benefits:
  • Made from an enhanced iron material for maximized noise suppression
  • Unique and specific vane design improves pad force distribution and enhances cooling airflow, allowing for optimal heat dissipation
  • Coated with a full Grey Fusion 4.0™ coating to protect against the elements
  • Meet the SAE standard for tensile strength, guaranteeing structural integrity and maximum service life
  • A turned finish minimizes noise and improves responsiveness for smoother stops

Installation Tips
  • Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function


Additional Resources

Additional Info on the Raybestos Police Line
OEM / Interchange Numbers: 22818355, 22950036, 23144340, 25819670, 88963556

Warranty Information:
Limited Lifetime. Warranty covers defects in materials and workmanship. Normal/uneven wear is not covered