STANDARD MOTOR PRODUCTS
More Information for STANDARD MOTOR PRODUCTS SG2152T
Continue Shopping
 
STANDARD MOTOR PRODUCTS SG2152T  
$26.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$26.79
Total
STANDARD MOTOR PRODUCTS SG2152Tclose
<
>
Part image
T-Series
Features & Benefits:
  • Breathable Teflon membrane allows increased air flow for a faster switch rate to improve fuel economy and save the motorist money at the pump
  • Dual internal talc seal makes our Oxygen sensors last longer
  • Manufactured with the highest grade materials for prolonged life and superior performance
  • One-piece laser welded body for maximum protection and precise operation maintaining sensor integrity
  • Stainless steel shield protects the element from thermal shock and regulates proper air flow to ensure faster sensor response and better performance
O2 Sensor Identification Guide

An OBD Scan Tool will usually identify Oxygen Sensors by the Bank Number (B1 = Bank 1) and Sensor Number (S1 = Sensor 1). Bank 1 will always contain Cylinder 1, which is located closest to the front of the engine.

Part manufacturers often use different terms than scan tools to identify sensor positions. Regardless of the vehicle's engine orientation, the right or left bank is determined by viewing the engine from the rear (opposite the drive belts).

A
Upstream Sensor (Before Converter)
B
Downstream Sensor (After Converter)
C
Left or Front Upstream Sensor (Before Converter)
D
Right or Rear Upstream Sensor (Before Converter)


Engine Bank Identification
Common O2 Sensor Contaminants

Oxygen (O2) Sensors commonly fail due to contamination. When checking or replacing an O2 Sensor, visually inspect the sensor body to determine if it has been contaminated by a faulty part or substance upstream, and correct the fault before replacing the sensor.

ANTIFREEZE POISONING
Common Causes:
  • Cracked or warped cylinder head
  • Leaking cylinder head gasket
  • Leaking intake manifold gasket
Antifreeze Poisoned O2 Sensor
Antifreeze Poisoned O2 Sensor
SILICONE POISONING
Common Causes:
  • Use of an improper silicone gasket sealant on the engine

Silicone Poisoned O2 Sensor
Silicone Poisoned O2 Sensor
CARBON BUILDUP
Common Causes:
  • Clogged air filter
  • Leaking or defective fuel injector

Carbon Buildup O2 Sensor
Carbon Buildup O2 Sensor
OEM / Interchange Numbers: 56028992AA, 56028994AA, 56029049AA, 56041698AA, 56044627AA, 56044652AA

STANDARD MOTOR PRODUCTS Warranty Information:
Ignition Control Modules (except T-Series): 5 years / 50,000 miles; Intermotor Wire Sets: Limited Lifetime; T-Series Parts: 1 year / 12,000 miles; TechSmart Tools: 1 year from date of purchase; All Other Parts: 3 years / 36,000 miles
Warranty Details