R1 CONCEPTS
More Information for R1 CONCEPTS 63131044R
{Alternate Inventory Numbers: 631-31044R}
Continue Shopping
 
R1 CONCEPTS 63131044R  
$46.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$46.79
Total
R1 CONCEPTS 63131044Rclose
<
>
Part image
eLINE Series; Silver Drilled and Slotted
R1 Concepts eLINE Series Drilled & Slotted Rotors are engineered for performance at a great value. Drilled and slotted rotors will grab more bite to the brake pads giving you shorter stopping distance especially in wet weather. The drilled holes will reduce the heat that builds on the rotor. The slots on the rotor removes brake and road debris and prevent pad glazing.

Features & Benefits:
  • Drilled holes will reduce the heat that builds on the rotor. Cross-drilled holes are also chamfered, which reduces the potential for cracking
  • Slots on the rotor removes brake and road debris and prevent pad glazing. The slots will grab more bite to the brake pads giving you shorter stopping distance especially in wet weather
  • Zinc Plated silver for rust protection on the rotor hub, vents, and edge
  • Engineered with premium G3000/G11H18 iron castings for strength, stability, and durability
  • Original Equipment (OE) vane configuration to ensure proper and maximum heat dissipation
  • CNC-machined to the tightest tolerances
  • 100% precision mill-balanced for smoother stopping and zero vibration at any speed
  • Non-directional finish to promote faster break-in and smoother stops
  • Quality tested to ensure long-lasting performance
  • New in Box, Ready to Install, No Modifications Required
Installation Tips
  • Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function


Videos

Product Highlight: R1 eLINE Series Drilled & Slotted Rotors


Attention California Customers - This product contains Antimony Oxide and other chemicals which is known in the State of California to cause cancer ( or reproductive problems).


R1 CONCEPTS Warranty Information:
12 months/12,000 miles