This MOOGŪ Problem SolverŪ Sway Bar Bushing features natural rubber material with an innovative synthetic fabric lining.

• Innovative Design: Synthetic fabric lining paired with a high-quality natural rubber material promotes durability
• Extended Service Life: Less prone to splitting, discoloring or cracking with age for long life
• In testing MOOG Problem Solver Sway Bar Bushings with synthetic fabric liner, they were found to last 3 times longer when compared to non-lined OEM bushings.*
• Precise Engineering: Optimized for quiet operation that eliminates the need for lubrication and maintenance
• Rigorous Testing: Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

*Based on internal testing comparing OEM bushings to MOOG bushings part numbers K201176, K201615, and K201620 with synthetic fabric lining. Testing was performed on a Three-Axis Tester to simulate sway bar bushing life on a vehicle.

How To Determine Stabilizer (Sway) Bar Diameter

To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.

1. Use a digital caliper or micrometer for a precise reading
2. Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
3. Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.

Additional Resources