|
GATES 24922
|
|
($17.15/Foot)
Price
|
$0.00
Core
|
+ Sold in packs of 5x5
Pack
|
$85.75
Total
|
|
|
|
|
|
| GATES 24922 Specifications |
|---|
| Centerline Length | 60" | | Centerline Length (ft) | 5 | | Centerline Length (m) | 1.52 | | Construction | 1-Ply | | End 1 Inside Diameter | 1.375" | | End 2 Inside Diameter | 1.375" | | Material | EPDM | | Minimum Bend Radius (IN) | 3 | | Minimum Bend Radius (MM) | 76 | | Molded | No | | Vacuum Rating (inHg) | 25 | | Working Pressure (psi) | 85 |
|
|
| 1 3/8" (85 psi, 25 In. Hg, 3" mbr); Green StripeŽ Wire Inserted |
- Provides the ability to replace many sizes of tailor-made curved hose.
- Engineered to resist electrochemical degradation (ECD®) – the
leading cause of hose failure.
- Heavy-duty fabric reinforcement with helical steel wire.
- Bends easily to make curved connections.
- Cuts easily with knife and wire cutters to reduce installation time.
- Maximum hose application coverage with minimum inventory.
- Resists water loss from water permeating through the hose wall and cover
-- a distinct advantage over silicone.
- Temperature rating: –40°F to +257°F (–40°C to +125°C)
- Packaging: 5-ft. and 10-ft. lengths.
- Exceeds SAE 20R2 Type EC (Class D2 Tube and cover) except in vacuum applications.
Note: Not recommended for oil, hydraulic or fuel transfer
applications
 Cooling System Hose Standards
| SAE |
- SAE 20R1: Heavy duty service; standard wall or heavy wall
- SAE 20R2: Heavy duty service with embedded wire for kink and vacuum resistance
- SAE 20R3: Normal service heater hose (ID under 1 inch)
- SAE 20R4: Normal service radiator hose (larger IDs)
- SAE 20R5: Normal service with embedded wire for high flexibility and vacuum resistance
|
| CLASS |
- Class A: High temperature resistant (e.g. silicone)
- Class B: High oil resistant (e.g. nitrile)
- Class C: Medium oil resistant (e.g. neoprene)
- Class D-1: Low oil resistant; improved service (e.g. EPDM)
- Class D-2: Low oil resistant; standard service
- Class D-3: Low oil resistant; high temperature resistant (e.g. p-EPDM)
|
*
EC suffix: Electrochemically resistant rubber;
HT suffix: High temperature resistant rubber (>125°C)
|
|
