Standard (Only 6 Remaining) ($31.89/Each)x6 $191.34
0.50MM Oversize (Out of Stock)
ENGINETECH P3035
Point to Zoom
Standard
ENGINETECH P3035 Specifications
Alloy
Hypereutectic
Bore Diameter
3.780
Bore Diameter
96.00
Clearance
0.0017
Compression Height
1.487
Height
0.300 IN
Oil Ring Thickness
3.00 MM
Piston Pin Outside Diameter
0.9449
Recess
Dome
Second Compression Ring Thickness
1.50 MM
Top Compression Ring Thickness
1.50 MM
Dome Top; Hypereutectic; Coated Skirt
Enginetech pistons are manufactured with state of the art materials to match OE requirements.
Features:
Made from Hypereutectic alloy for increased strength and scuff resistance over cast pistons
Skirt coated for longer life and increased horsepower
Machined (where appropriate) for a very smooth finish
Includes a mechanism to enable oil distribution for pin lubrication to prevent them from locking up (pin starvation of oil is one of the leading causes of engine failures)
All oil return slots are chamfered to prevent stress cracking from forming at any unfinished angles
Why Choose Enginetech Pistons?
Attention California Customers - Warning: This product may expose you to chemicals including lead and nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
OEM / Interchange Numbers: H697CP
ENGINETECH Warranty Information:Stock / Standard Replacement Parts: 12 months / 12,000 miles; High Performance Parts: No WarrantyWarranty Details