FRAM TG3976A
|
|
$13.59
Precio
|
$0.00
Depósito
|
+ Vendido en Paquetes de 1x1
Empacar
|
$13.59
Total
|
|
|
|
Especificaciones de FRAM TG3976A |
---|
Válvula Antidrenaje | No | Circunvalación Válvula de Alivio | No | Tapón de Drenaje Incluido | No | Tipo de filtro | Montaje Roscado Bote | Empaque Diámetro interno (pulg.) | 2.460 | Empaque o Sello Incluido | Sí | Empaque Diámetro Externo (pulg.) | 2.810 | Grosor de empaque (pulg.) | 0.203 | Tipo de Empaque | Base | Altura (pulg.) | 7.131 | Carcasa Color | Plata | Entrada Tipo | Roscado | No Deslizamiento Agarre | No | Diámetro Externo (pulg.) | 3.690 | reutilizable | No | Tamaño de Rosca | Estándar | Tuerca de Par de Torsión | No |
|
|
With 15,000 miles of protection, Tough Guard is the ideal filter for drivers who have high mileage vehicles or push their vehicles in stop-and-go traffic, towing and extreme weather conditions. FRAM's re-engineered Synthetic-Blend filter media provides premium engine protection for your vehicle.
Features & Benefits:
![](/genImages/915/ToughGuard.jpg) -
SureGrip: Provides non slip surface for easier installation and removal.
-
Precision Relief Valve: Coil spring with glass-fiber-reinforced nylon poppet.
-
Media: Stronger, more durable media provides an outstanding 99% dirt-trapping efficiency. Synthetic fiber/cellulose blend increases dirt-trapping and dirt-holding capacity for higher levels of engine protection and longer filter life. Microscopic synthetic fibers create small windows that trap dirt particles without affecting oil flow.
-
Anti-Drainback Valve: Silicone anti-drainback valve delivers superior start-up engine protection with up to 3X the hot oil resistance.
-
Gasket: Internally lubricated sealing gasket for easier filter removal.
![](/Images/MoreInfo/star.png) ¿Qué Filtro De Aceite Es El Adecuado Para Usted?
| Estilo de Conducción |
Tipo de filtro |
Los intervalos de cambio de aceite |
Normal Ciudad / Autopista |
Tráfico Pesado |
Condiciones Sucias / Polvorientas |
Clima Extremo |
Remolque |
Económico
|
3,000 - 5,000 Millas |
★ |
|
|
|
|
Reemplazo Estándar
|
Recomendado por el Fabricante de Equipos Originales |
★ |
★ |
★ |
|
|
Alto Rendimiento / Uso Rudo
|
Recomendado por el Fabricante de Equipos Originales |
★ |
★ |
★ |
★ |
★ |
![](/Images/MoreInfo/install.png) Cambio de Aceite Caja de heramienta
![](/Images/MoreInfo/install.png) Instrucciones de Instalación - Check owner's manual for correct oil specification, viscosity, and amount. Purchase oil by year, make, and model, or under the Tools & Universal Parts tab on RockAuto.com
- Wear proper protective gear (safety glasses, gloves, long sleeve shirt) to protect skin and eyes from hot oil.
- Place a Drain Pan under the crankcase and carefully open drain plug to drain oil. When oil is fully drained, reinstall drain plug on the oil pan.
- Position the drain pan under the oil filter. Unscrew oil filter (using a Filter Wrench, if necessary).
- Clean mounting base, making sure the O-ring from the old filter is not stuck to the filter mount.
- Apply film of clean oil to filter gasket.
- Screw new filter on until gasket reaches base contact, then tighten filter to manufacturer specifications.
- Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
- Shut off engine and recheck oil level after 5 minutes. Top off as necessary.
Es ilegal deshacerse de aceite usado o de filtros de aceite en un vertedero sanitario o en un cauce público. Muchas ciudades tienen sitios gratuitos para depositar desechos peligrosos, que una búsqueda rápida por internet le ayudará a encontrar.
|
Fabricante Original de Equipo / Números de Intercambio: 4429615, 4761277, 5016547AA, 5016547AB, 5083285AA, 5093092AA |
FRAM Información de Garantía:Filtros - Intervalos de servicio recomendados por el fabricante de vehículo Repuestos Duros - 12 mesesDetalles de Garantía |
|