|
DORMAN 626804
|
|
$46.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$46.79
Total
|
|
|
|
|
|
| DORMAN 626804 Specifications |
|---|
| Angle | 90 Deg | | Arm Length | 40.5 IN | | Axis 1 Length (IN) | 9.5 | | Axis 2 Length (IN) | 31 | | Bending Radius | 90 Deg | | Branch Quantity | 2 | | Burst Pressure (PS) | 75 | | Centerline Length (IN) | 40.5 | | Clamps Included | No | | Color | Black | | Contains Spring | No | | Coolant Hose Heat Shield Included | No | | Coolant Hose Type | Branched | | End 1 Attachment Type | Hose | | End 1 Inside Diameter (IN) | 0.60 | | End 1 Type | Hose | | End 2 Attachment Type | Quick Disconnect | | End 2 Inside Diameter (IN) | 0.95 | | End 2 Type | Quick Disconnect | | End 3 Attachment Type | Hose | | End 3 Inside Diameter (IN) | 0.70 | | Heat Shield Included | No | | Hose Attachment End 1 | Hose | | Hose Attachment End 2 | Quick Disconnect | | Hose End (1) Outside Diameter (IN) | 0.97 IN | | Hose End (2) Outside Diameter (IN) | 1.25 in | | Hose End (3) Outside Diameter (IN) | 0.87 IN | | Hose Material | Rubber | | Hose Outside Diameter | 0.88 | | Hose Overall Length (IN) | 40.5 | | Hose Quantity | 1 | | Hose Shape | Molded Assembly | | Inside Diameter | 0.73 IN | | Length | 40.5 IN | | Material | Rubber | | Maximum Bend Angle | 45 | | Maximum Working Pressure (PS) | 50 | | Modular | Branch | | Modular Components Included | Branch | | Molded | Yes | | Mounting Bracket Included | No | | Outside Diameter | 0.89 IN | | Package Contents | 1 Heater Hose Assembly | | Protective Sleeve Attached | No | | Protective Sleeve Included | No | | Quick Connect Fitting Quantity | 1 | | Thermostatically Controlled | No | | Working Pressure | 50 psi |
|
|
Original equipment HVAC heater hose assemblies often fail due to cracks in the plastic T-connector. This Dorman OE FIX replacement features an upgraded aluminum T-connector to prevent similar failures in the future.
Features & Benefits:
- Upgraded material - this replacement engine heater hose assembly features aluminum T-connectors for added durability
- Application specific - designed to match the original fit and function of heater hoses on certain vehicle years, makes and models
- Complete replacement - hoses come with necessary clamps for easy installation
- Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience
 Signs it is Time to Replace Your Heater Hose(s) Prevent system contamination and coolant leaks that could cause your engine to overheat by checking for these common signs of Heater Hose damage / failure:
| INTERNAL DAMAGE |
|
Soft / mushy hose ends, usually about 2 inches from the clamp.
 Internally Damaged Hose |
| LEAKAGE |
|
Moisture, drips or coolant bleed marks on or around the hose clamps, connectors or hose.
 Leaking Hose |
| HEAT DAMAGE |
|
Slight swelling, or a hardened, glossy cover that is covered with cracks.
 Heat Damaged Hose |
| OZONE DAMAGE |
|
Tiny, parallel cracks in the cover, usually at hose bends.
 Ozone Damaged Hose |
| ABRASION DAMAGE |
|
Rubbing marks on, or damage to the hose cover.
 Abrasion Damaged Hose |
| OIL CONTAMINATION |
|
Soft or spongy to the touch - bulges and swelling are readily apparent.
 Oil Contaminated Hose |
|
| OEM / Interchange Numbers: CV6Z18N344A |
|
