|
AUTOTECNICA GM0613018
|
|
$31.79
Precio
|
$0.00
Depósito
|
+ Vendido en Paquetes de 1x1
Empacar
|
$31.79
Total
|
|
|
|
|
|
|
|
|
Características y Beneficios:
- Diseño de reemplazo de equipo original para una fácil instalación plug-and-play
- Fabricado con materiales de alta calidad para resistir la condensación de la ventilación interna que puede corroer otros actuadores de puertas de mezcla HVAC
- Los modernos circuitos resisten el sobrecalentamiento y la combustión para una mayor fiabilidad a largo plazo
- Probado en fábrica para su correcto funcionamiento
- Replacement of failed blend door actuator instantly restores control of heating and air conditioning vent selection and airflow temperature blending
 ¿Qué Actuador Necesita?
| RECIRCULATION |
Controls the intake of air into the system, either bringing outside air in or using inside air in recirculation.
 |
| BLEND |
Controls the temperature of the air flowing from the vents by mixing hot and cold air from the heater core and the evaporator core.
 |
| MODE |
Controls which vents have air flow, i.e. Floor, Panel or Front, Defrost, or any combination of those.
 |
Diagram:
Main vs. Auxiliary
The term "Main" refers to the air flow control of the Front Vents. The term "Auxiliary" refers to the air flow control of the Rear Vents.
Many actuators that control the air flow to the rear vents are still located in the front of the vehicle. Some larger and/or higher end vehicles may have Auxiliary air door actuators in the center console or in the rear of the vehicle.
Atención Clientes de California - ADVERTENCIA: Cáncer y Daño Reproductivo - www.P65Warnings.ca.gov
|
| Fabricante Original de Equipo / Números de Intercambio: 16163982, 52402588, 52402598, 52402612, 89018365 |
Información de Garantía:24 meses |
|
