DORMAN 977316
|
|
$107.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$107.79
Total
|
|
|
|
DORMAN 977316 Specifications |
---|
Adjustable | No | Bore Diameter (IN) | 3.4 | Connector/Terminal Type | Blade | Electrical Connection Type | Female Socket | Fuel Injectors Included | No | Fuel System Type | Gas | Gasket or Seal Included | Yes | Housing Color | Metal | Housing Material | Cast Aluminum | Idle Air Control Motor Included | No | Inlet Quantity | 0 | Installation Hardware Included | No | Outlet Quantity | 0 | Package Contents | 1 Fuel Injection Throttle Body; 1 Gasket | Terminal Count | M6 -1.0 | Throttle Body Mounted | No | Throttle Body Spacer Included | No | Throttle Body Type | Electronic | Throttle Position Sensor Included | Yes | Venturi Quantity | 0 |
|
|
This 100% new electronic throttle body matches the original equipment part for fit and performance. With a corrosion-resistant aluminum body, it features a new sensor and circuit board for reliable performance. Features & Benefits:- Direct replacement - this electronic throttle body matches the original equipment throttle body for fit and function
- Plug and play installation - this throttle body plugs into the original equipment wiring harness with no adapter required
- Cost-effective and reliable - offers original manufacturer quality at a competitive price with no core charge
- Rigorously tested - this throttle body has undergone corrosion and try-on testing to ensure durability for a long service life
Experiencing Acceleration or Idling Issues? It Might Not be the Throttle Body!
Poor acceleration, hesitation and other idling issues can be caused by failure of a variety of parts. Use the chart below to help determine which part is causing the problem.
Part | System | Other Symptoms |
Throttle Body | Fuel & Air | |
Mass Air Flow Sensor | Exhaust & Emission | - Difficulty Starting or Turning Engine
|
Air Filter | Fuel & Air | - Dark Filter Media
- Debris in Filter or Filter Box (Change every year!)
|
Fuel Injector | Fuel & Air | |
Vacuum Hose / Connector | Hoses / Lines & Clamps | - Hissing, Squealing or Sucking Sound from Cracked Connector or Hose (Use a Vacuum Tester)
|
Spark Plug or Spark Plug Wire or Ignition Coil
| Ignition | - Increase in Exhaust Emissions
- Visible Wire Damage
- Oil Leak
|
Accelerator Pedal Position Sensor | Interior | - Limp Mode
- No / Delayed Pedal Response
|
![](/Images/MoreInfo/install.png) Installation Tips - Perform OEM Recommended idle relearn procedure. Some applications may require the use of an OBD Scan Tool while others may refer to the Owners Manual.
- A relearn of idle values can be forced by disconnecting the negative battery cable for several minutes in order to clear the electronic control module's memory.
- Several minutes of idling and highway driving may be necessary to relearn idle values. Electrical loads such as headlights, AC, radio, etc. should be turned off while relearning.
- Erratic idle or engine surging after installation of replacement unit may be resolved by putting a load on the engine. If idle evens out after shifting into gear, shift back into park and check idle RPM - perform relearn again if a drivability condition is present.
- Clean intake manifold mounting surface and replace Intake Manifold Gasket, if necessary.
- Inspect Air Cleaner Intake Hose for cracks and proper sealing - replace or repair with Multi-Purpose Sealant, if necessary.
- Check harness for broken wires and wiggle connector to try and reproduce the problem. Replace or clean Connector, if necessary.
- Clear all diagnostic trouble codes from vehicle computer prior to idle relearn.
Attention California Customers - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
OEM / Interchange Numbers: 12589235, 12601387, 12629992, 2173151 |
|