API 140776167
|
|
$15.46
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$15.46
Total
|
|
|
|
|
|
Autopart International Ultra Series Rotors and Drums are truly
outstanding products. All of the Ultra Series Rotors are built to OE specifications
for form, fit, finish and vane construction. The Ultra Series Rotors are completed
by cross cutting for proper seating to the pad, and mill balanced to provide
smooth operation and top performance.
Autopart International Premium Brake Rotors and Drums are
of exceptional quality. All of The Premium Rotors are made on an adissamatic
line allowing the casting and the machining to occur all in one operation. This
process provides for the highest quality brake rotor available.
![](/Images/MoreInfo/install.png) Installation Tips - Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
- Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
- After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
- Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
- Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
- Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
- After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
|
Closeout Inventory Warranty Information:Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).Regular Inventory Warranty Information: |
|