WAI GLOBAL
More Information for WAI GLOBAL MAF10145
Continue Shopping
 
WAI GLOBAL MAF10145  
$45.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$45.79
Total
WAI GLOBAL MAF10145close
<
>
Part image
Sensor Only
WAI Global Mass Air Flow Sensors are manufactured and tested with OEM equipment to OEM standards.

Features:
  • 100% New
  • Outperforms competition when tested in extreme environmental conditions (-40 °F to 250°F)
  • Quality certified with ISO 9001, TS 16949 & ISO 14001
Check for Vacuum Leaks First!

Vacuum leaks present symptoms similar to a faulty MAF Sensor. When replacing the MAF, always check for vacuum leaks, too. Common sources include:

  • Cracked or loose Vacuum Hoses / Connectors - an audio Stethoscope can help detect air induced sounds from vacuum leaks.
  • Leaking Intake Manifold Gasket (found in the "Engine" category) - Vacuum Gauge readings below 17-22 in-Hg (normal manifold vacuum at sea level) at idle may indicate an intake manifold gasket leak.
    • Note: As elevation increases, readings decrease. Subtract 1 in-Hg from normal manifold vacuum reference for every 1,000 feet increase in elevation above 2,000 feet.
  • Stuck open PCV Valve - remove the PCV Valve and gently shake it; if it does not rattle, the valve is clogged or dirty and should be replaced.
  • Cracked Intake Boot (found in the "Engine" category)
Videos

Cleaning Your MAF Sensor

Additional Resources

RockAuto Newsletter: Maintaining the Optimal Air/Fuel Mixture

Warranty Information:
Limited Lifetime