FVP 14183010
|
|
$91.79
Price
|
$270.00
Core
|
+ Sold in packs of 1x1
Pack
|
$361.79
Total
|
|
|
|
FVP 14183010 Specifications |
---|
Abutment Clips Included | Yes | Air Gap | 100.5mm | Bleeder Install Thread Count in | 8 | Bleeder Screw Included | Yes | Bleeder Screw Thread Diameter | 0.4375 IN | Bleeder Screw Thread Size | 7/16"-24 | Body Air Gap | 96.0mm | Bracket Air Gap | 45.5mm | Bracket Included | No | Caliper Casting Material | Cast Iron | Caliper Color | Gray | Caliper Manufacturer | Meritor | Caliper Type | Fixed | Casting Number | 595; 597; 9187; 9188; WHB1 | Inlet Fitting Type | Inverted | Inlet Thread Diameter | 0.438 IN | Inlet Thread Size | 7/16"-24 | Mounting Bracket Included | No | Mounting Hardware Included | No | Mounting Hole Diameter | 15.60 mm | Mounting Hole Diameter | 0.614 IN | Pad Wear Sensor Included | No | Pads Included | No | Piston Diameter | 70.000 mm | Piston Diameter | 2.756 in | Piston Material | Phenolic | Piston Quantity | 4 | Published Bore Size | 70 | Rust Preventative Coating | Yes |
|
|
FVP Friction Ready calipers are remanufactured to meet ensure predictable and reliable performance while providing long service life.
Features:
- 100% pressure tested and inspected to guarantee proper operation and fitment
- All guide bolts, pins and seals are replaced, guaranteeing the caliper will function correctly
- Hardware and brackets included (where applicable) to facilitate an easy installation
- Brake pads not included
![](/Images/MoreInfo/install.png) Installation Tips - Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
- Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
- Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
- Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
- After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
- After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid
|
Warranty Information:Limited Lifetime |
|