FVP
More Information for FVP 14133111
{Alternate Inventory Numbers: 141-33111}
Continue Shopping
 
FVP 14133111  
$44.79
Price
$45.00
Core
+ Sold in packs of 1x1
Pack
$89.79
Total
FVP 14133111close
<
>
Part image
FVP 14133111 Specifications
Abutment Clips IncludedYes
Air Gap100.5mm
Bleeder Screw IncludedYes
Bleeder Screw Thread Diameter7.000 MM
Bleeder Screw Thread SizeM7-1.00
Bracket IncludedNo
Caliper Casting MaterialCast Iron
Caliper ColorGray
Caliper ManufacturerATE
Caliper TypeFixed
Casting Number14; ATE 61 14
Inlet Thread Diameter10.000 MM
Inlet Thread SizeM10-1.00
Mounting Bracket IncludedNo
Mounting Hardware IncludedNo
Mounting Hole Diameter14.00 MM
Mounting Hole Diameter0.551 in
Pad Wear Sensor IncludedNo
Pads IncludedNo
Piston Diameter2.126 in
Piston Diameter54.000 MM
Piston MaterialSteel
Piston Quantity2
Published Bore Size54
Rust Preventative CoatingYes
Reman
FVP Friction Ready calipers are remanufactured to meet ensure predictable and reliable performance while providing long service life.

Features:
  • 100% pressure tested and inspected to guarantee proper operation and fitment
  • All guide bolts, pins and seals are replaced, guaranteeing the caliper will function correctly
  • Hardware and brackets included (where applicable) to facilitate an easy installation
  • Brake pads not included
Installation Tips
  • Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
  • Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
  • Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
  • Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
  • After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
  • After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid

Warranty Information:
Limited Lifetime