Especificaciones de STANDARD MOTOR PRODUCTS ADR275 |
---|
Género de Conector | Hembra | Contenidos | 1 Actuador | Número de Orejas de Montaje | 0 | Género de Terminal | Macho | Cantidad de Terminales | 4 | Tipo de terminal | Pasador |
|
|
Standard® es la principal marca de gestión profesional del motor en el mercado de recambios de automoción actual. Standard es líder en tecnología avanzada de automoción con más de 40.000 productos para una cobertura completa del vehículo.
Características y Beneficios:- La sustitución exacta restablece el funcionamiento de la unidad de equipo original fallida.
- Incluye Completo Motor y Placa de Circuitos.
- Fabricado con alta-calidad plástico Molduras para garantizar la durabilidad.
- Probado exhaustivamente para garantizar la durabilidad y el rendimiento.
- Diseñado para cumplir o superar el rendimiento del equipo original, proporcionando al técnico de hoy en día las piezas de calidad necesarias para hacer el trabajo bien, a la primera.
¿Qué Actuador Necesita?
RECIRCULATION |
Controls the intake of air into the system, either bringing outside air in or using inside air in recirculation.
|
BLEND |
Controls the temperature of the air flowing from the vents by mixing hot and cold air from the heater core and the evaporator core.
|
MODE |
Controls which vents have air flow, i.e. Floor, Panel or Front, Defrost, or any combination of those.
|
Diagram:
Main vs. Auxiliary
The term "Main" refers to the air flow control of the Front Vents. The term "Auxiliary" refers to the air flow control of the Rear Vents.
Many actuators that control the air flow to the rear vents are still located in the front of the vehicle. Some larger and/or higher end vehicles may have Auxiliary air door actuators in the center console or in the rear of the vehicle.
|
Fabricante Original de Equipo / Números de Intercambio: 64116956706, 64119231884, 64119321034, C2Z11240, C2Z11440, C2Z16128, C2Z2902, T1015556H |
|