|
GATES G252050608
|
|
$28.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$28.79
Total
|
|
|
|
|
|
| GATES G252050608 Specifications |
|---|
| Bent Tube Angle | 90 | | Coupling Description | MegaCrimp Female SAE 45 Flare Swivel - 90 Bent Tube | | Cut Off (IN) - C | 1.4 | | Cut Off (MM) - C | 35.6 | | Drop (IN) - T | 1.75 | | Drop (MM) - T | 44.5 | | Gender | Female | | Hose Inside Diameter (IN) | .375 | | Hose Inside Diameter (MM) | 9.5 | | Hose Recommendation | Can Accommodate Various Hose Outside Diameters on Both One-Wire & Two-Wire Braid Hydraulic Hose | | Length (IN) - L | 2.5 | | Length (MM) - L | 63.5 | | Mating Angle | 45 | | Nose Seat | Standard | | Nut Hex (IN) - H2 | .875 | | Seal Type | Mated Angle | | Swivel | Yes | | Thread Size | 3/4-16 |
|
|
| Female SAE 45 Flare Swivel - 90 Bent Tube (MegaCrimp) |
Gates MegaCrimp couplings are designed for use with Gates wire braid hydraulic hose to create a robust, leak-free assembly. The pre-assembled coupling is designed with a patented C insert attached to the ferrule. This design ensures that crimping forces are evenly distributed to form a concentric, leak-free seal. One MegaCrimp coupling size can accommodate various one and two-wire braid hydraulic hoses of different constructions and wall thicknesses, simplifying inventory requirements, helping to reduce costs and simplifying coupling selection. - Robust bite-the-wire crimp
- Low profile
- Full-stem insertion
- Full-length crimp
- Tested to industry-leading 600,000 impulse cycles
- Simplifies inventory management
- Environmentally-friendly TuffCoat plating for 345 percent better corrosion resistance than SAE standard
|
|
