MOTORCRAFT KM4901
|
|
$4.27
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$4.27
Total
|
|
|
|
MOTORCRAFT KM4901 Specifications |
---|
Branch Quantity | 1 | Centerline Length | 81.9-80.4 | Clamps Included | No | Contains Spring | No | End 1 Inside Diameter | 5.51-6.25 | End 1 Outside Diameter | 7.95-7.54 | End 2 Inside Diameter | 6.7056-6.604 | Hose Color | Silver | Hose Material | Low Carbon Steel | Hose Shape | Hexagonal + Cylinder | Maximum Working Pressure | 2.758 Bar |
|
|
Features:
- Premium quality EPDM rubber used in most hoses; designed to help resist heat, oil, grease, antifreeze and all approved coolant additives
- Flexible tube sections are reinforced with braided polyester for added strength
- Burst pressure tested up to ten times the maximum peak operating pressure
- Tested for cold weather flexibility, high heat resistance and against chemical breakdown for long life and performance
![](/Images/MoreInfo/bulb.png) Signs it is Time to Replace Your Heater Hose(s) Prevent system contamination and coolant leaks that could cause your engine to overheat by checking for these common signs of Heater Hose damage / failure:
INTERNAL DAMAGE |
Soft / mushy hose ends, usually about 2 inches from the clamp.
Internally Damaged Hose |
LEAKAGE |
Moisture, drips or coolant bleed marks on or around the hose clamps, connectors or hose.
Leaking Hose |
HEAT DAMAGE |
Slight swelling, or a hardened, glossy cover that is covered with cracks.
Heat Damaged Hose |
OZONE DAMAGE |
Tiny, parallel cracks in the cover, usually at hose bends.
Ozone Damaged Hose |
ABRASION DAMAGE |
Rubbing marks on, or damage to the hose cover.
Abrasion Damaged Hose |
OIL CONTAMINATION |
Soft or spongy to the touch - bulges and swelling are readily apparent.
Oil Contaminated Hose |
|
OEM / Interchange Numbers: 2L3E8597AB, 2L3Z8597AB, KM4390, KM4731, KM4765YC, XL3Z8597AA |
Warranty Information:24 months/unlimited miles; Motorcraft warranties are valid to U.S. customers onlyWarranty Details |
|