• High-quality natural rubber bushings increase durability and decrease road noise (where applicable).
• High-strength 40Cr alloy steel ball joints made with CNC precision machining ensure accuracy and stability of the steering (where applicable).
• High quality ball joint dust cover is resistant to extreme temperatures to prevent cracking (where applicable).
• Made with either 6082 aluminum or QT400-18 ductile iron for improved durability.

How To Determine Stabilizer (Sway) Bar Diameter

To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.

1. Use a digital caliper or micrometer for a precise reading
2. Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
3. Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.