|
DORMAN 977785
|
|
$125.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$125.79
Total
|
|
|
|
|
|
| DORMAN 977785 Specifications |
|---|
| Adjustable | No | | Bore Diameter (MM) | 71.6 | | Connector/Terminal Type | Pin | | Electrical Connection Type | CONNECTOR | | Fuel Injectors Included | No | | Fuel System Grade | Gas | | Fuel System Injection Type | Gas | | Fuel System Type | Gas | | Gasket or Seal Included | Yes | | Housing Color | Natural | | Housing Material | Aluminum | | Idle Air Control Motor Included | No | | Inlet Diameter (MM) | 71.6 | | Inlet Quantity | 1 | | Inlet Type | Flanged | | Installation Hardware Included | No | | Mounting Hardware Included | No | | Outlet Diameter (MM) | 64 | | Outlet Quantity | 1 | | Outlet Type | Flanged | | Package Contents | 1 Electronic Throttle Body; 1 Gasket | | Terminal Count | M6 -1.0 | | Throttle Body Material | Aluminum | | Throttle Body Mounted | No | | Throttle Body Spacer Included | No | | Throttle Body Type | Electronic | | Throttle Position Sensor Included | Yes | | Venturi Quantity | 0 |
|
|
Original equipment throttle bodies often fail due to moisture infiltration, worn sensor contacts, or excessive oil buildup. This upgraded Dorman OE FIX throttle body features a non-contact Hall effect sensor and a proprietary Sensor Shield shaft seal designed to better resist damaging moisture, oil, and other contaminants. It also features 100% new aluminum construction for better resistance to warping than the OE plastic throttle body. A specially designed mounting gasket is included for a complete repair. As with any throttle body replacement, we recommend performing an idle relearn with an appropriate scan tool.
Features & Benefits:
- Durable construction - 100% new aluminum construction for better resistance to warping than OE plastic
- Direct replacement - this plug-and-play improved throttle body features a contactless Hall effect sensor and a proprietary Sensor Shield shaft seal designed to better resist damaging moisture, oil, and other contaminants
- Improved design - this throttle body includes a new gasket to help ensure a professional and predictable repair
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
Experiencing Acceleration or Idling Issues? It Might Not be the Throttle Body!
Poor acceleration, hesitation and other idling issues can be caused by failure of a variety of parts. Use the chart below to help determine which part is causing the problem.
| Part | System | Other Symptoms |
|---|
| Throttle Body | Fuel & Air | |
| Mass Air Flow Sensor | Exhaust & Emission | - Difficulty Starting or Turning Engine
|
| Air Filter | Fuel & Air | - Dark Filter Media
- Debris in Filter or Filter Box (Change every year!)
|
| Fuel Injector | Fuel & Air | |
| Vacuum Hose / Connector | Hoses / Lines & Clamps | - Hissing, Squealing or Sucking Sound from Cracked Connector or Hose (Use a Vacuum Tester)
|
|
Spark Plug or Spark Plug Wire or Ignition Coil
| Ignition | - Increase in Exhaust Emissions
- Visible Wire Damage
- Oil Leak
|
| Accelerator Pedal Position Sensor | Interior | - Limp Mode
- No / Delayed Pedal Response
|
 Installation Tips - Perform OEM Recommended idle relearn procedure. Some applications may require the use of an OBD Scan Tool while others may refer to the Owners Manual.
- A relearn of idle values can be forced by disconnecting the negative battery cable for several minutes in order to clear the electronic control module's memory.
- Several minutes of idling and highway driving may be necessary to relearn idle values. Electrical loads such as headlights, AC, radio, etc. should be turned off while relearning.
- Erratic idle or engine surging after installation of replacement unit may be resolved by putting a load on the engine. If idle evens out after shifting into gear, shift back into park and check idle RPM - perform relearn again if a drivability condition is present.
- Clean intake manifold mounting surface and replace Intake Manifold Gasket, if necessary.
- Inspect Air Cleaner Intake Hose for cracks and proper sealing - replace or repair with Multi-Purpose Sealant, if necessary.
- Check harness for broken wires and wiggle connector to try and reproduce the problem. Replace or clean Connector, if necessary.
- Clear all diagnostic trouble codes from vehicle computer prior to idle relearn.
Attention California Customers - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
| OEM / Interchange Numbers: 4593858AA, 4593858AB, 4861661AA, 4861661AB |
|
