RAYBESTOS RC11622C
|
|
$90.79
Price
|
$45.00
Core
|
+ Sold in packs of 1x1
Pack
|
$135.79
Total
|
|
|
|
RAYBESTOS RC11622C Specifications |
---|
Bleeder Screw Thread | M10x1 | Caliper Bracket Mounting Hole Size (MM) | 12.000 | Caliper Bracket Mounting Hole Thread Pitch (MM) | 1.750 | Caliper Casting Material | Aluminum | Caliper Configuration | Loaded (Includes Pads) | Caliper Piston Diameter (MM) | 38.000 | Caliper Piston Quantity | 1 | Caliper Type | Integral Parking Brake | Friction Material | Hybrid | Manufacturing Type | Remanufactured | Surface Finish | Coated |
|
|
Raybestos R-Line Reman Plated Brake Calipers are engineered to face the toughest weather conditions. A proprietary zinc electroplating process helps prevent rust and provides protection for all kinds of weather. These plated brake calipers maintain their high-quality appearance throughout their life, delivering continued functionality and an extended service life.
Features & Benefits:
- OE-matched design and specifications
- Zinc electroplating on all cast iron housings and brackets for all-weather protection
- Surface finish to closely resemble OE
- EPDM70 rubber components for superior heat resistance, performance and durability
- Silicone boots match or improve OE design where applicable
- Pre-lubricated guide pins included
- Brackets included where applicable
Raybestos works tirelessly to ensure their calipers are tested to the highest multinational industry standards to ensure you receive a high quality product. The testing parameters include:
- High and low-pressure leak testing
- Extreme pressure strength and leak testing
- Cyclic durability under extreme temperatures
- Piston retraction, fluid displacement and residual drag torque
- Humidity and salt spray testing for corrosion resistance
- Rubber aging and degradation resistance
![](/Images/MoreInfo/install.png) Installation Tips - Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
- Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
- Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
- Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
- After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
- After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid
Attention California Customers - Warning: This product can expose you to chemicals including silica, which is known to the state of California to cause cancer, and lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
|
Warranty Information:18 Months / 18,000 Miles |
|