TRANSGO SKALLISONJR
|
|
$73.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$73.79
Total
|
|
|
|
TRANSGO SKALLISONJR Specifications |
---|
Installation Note | Transmission Removal Not Required |
|
|
Shift Kit; For LCT1000, 2000, 2400 Transmissions |
This TransGo Allison-Jr SHIFT KIT® Valve Body Repair Kit fits 2005 to 2010 General Motors vehicles equipped with the Allison 1000, 2000 and 2400 six-speed automatic transmission. Note: The five-speeds have an external MLP switch, while the six-speeds have an internal MLP switch. Common complaints on this transmission are: neutralizes under heavy load in 4th or 5th, stuck in one gear as well as gear ratio and solenoid performance codes.
The included valve body components in this kit are designed to provide substantial gains in friction plate durability. With this kit installed, the friction torque capacity of the holding clutches and brakes in 2nd through 6th gear is increased by approximately 100% when the lock-up clutch is off and line pressure is at maximum. Since transmission removal is not required, install it before adding engine horsepower to prevent internal damage.
Corrects/Prevents/Reduces:
- Slip 3-4
- Neutralizes under load in 3rd or 4th
- Burnt C2 and C3 friction plates
- Stuck in one gear
- Codes: P0732, P0733, P0734, P0735, P0766 and P0777
Also Includes:
- (2) USA-made hardened steel trim valves, balls, inner and outer springs
- Drill bit
TransGo Shift Kit vs. Reprogramming Kit Shift Kit® -- DESIGNED FOR DURABILITY
TransGo Shift Kit® valve body repair kits correct, prevent and reduce multiple transmission problems such as shift irregularities and durability issues. These kits are designed for normal everyday use and light duty towing.
Reprogramming Kit -- ENGINEERED FOR PERFORMANCE
TransGo Reprogramming Kit™ valve body performance kits are made for Heavy Duty and/or Performance applications, and include additional features such as:
- Gear Command™: Allows full control of downshifting and will hold any gear to any RPM. Retains automatic up shifts in the drive position. Certain units allow manual up shifts on driver command.
- Manual Shift Control: This feature fully converts the valve body to manual/stick shift operation – no automatic shifts. Most Manual Shift Control kits also allow you the ability to easily convert back to automatic.
- Tuneless: Patent-pending internal calibration technology “tuneless” allows install without the need for additional transmission tuning software or programmers.
What is a Shift Kit?
TransGo Shift Kit® valve body repair kits are a combination of new and re-engineered components that are primarily installed in the valve body, but sometimes the pump or even in the transmission itself. These kits solve a variety of inherent problems and weaknesses that differ by transmission model, including usual warp and wear, often allowing a higher mileage transmission to work better than a new one. Typical components of a valve body repair kit include springs, valves, check balls, gaskets, separator plates, etc.
![](/Images/MoreInfo/support.png) TransGo Technical Support If you are having trouble choosing the correct TransGo part, or have questions before, during or after installation of this part, TransGo's ASE Certified Technicians are available to help.
📞 Phone: 626-443-7451 (7:00am-4:00pm PST M-F)
📧 Email: support@transgo.com![](https://www.rockauto.com/logos/transgoLogo.png)
|
TRANSGO Warranty Information:12 Months |
|