M-PACT 04201NSAWS
|
|
$178.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$178.79
Total
|
|
|
|
|
|
Includes Slave Cylinder; 11-1/2" x 1-1/8" x 10T |
The M-Pact stock replacement clutch kit delivers quality, performance, and reliability. Each clutch kit consists of matched components that result in a smoother, more consistent engagement. Every M-Pact clutch set includes a premium quality cover and disc assembly, release bearing, pilot bearing (when required), alignment tool, and lubricant.
Features:
- Application specific matched components are manufactured to OEM standards
- Organic clutch disc material ensures smooth, chatter free engagements
- Contains premium cover and disc assembly, release bearing, pilot bearing, alignment tool and lubricant (where pictured)
Why Self-Adjusting Clutches Are A Better Value:
Overtime, the material on the friction disc wears, causing the pressure plate to move closer to the flywheel. Eventually without adjustment, there will be permanent contact to the clutch, causing the clutch to fail.Non-self Adjusting Clutches must be routinely adjusted manually to the proper height to keep space between the flywheel & pressure plate when the pedal is pressed. Self-Adjusting Clutches automatically adjust as the friction material wears, keeping the proper spacing and pressure through out the life of the clutch and eliminating excessive load on the release bearing. While Self-Adjusting Clutches are typically more expensive up front, they can save you money over the life of your clutch.
![](/Images/MoreInfo/install.png) Tips & Tools For The Job - Wear a Dust Mask to protect against hazardous clutch dust. You can also spray the clutch with water prior to removal to reduce the amount of airborne dust during disassembly.
- Use a Flywheel Turner to hold the flywheel in place while removing and reinstalling the pressure plate bolts.
- Apply Blue Threadlocker to flywheel bolts prior to installation to prevent backing out due to the high vibrations flywheels are subject to.
- Use the provided lubricant to lightly lubricate the splines of the input shaft. Over lubricating the input shaft risks lubricant transfer to the clutch friction disc and can cause clutch slippage.
- Be sure to install the new clutch friction disc in the correct direction. The disc will have a "Flywheel Side" label on one side.
|
|