PROFESSIONAL PARTS SWEDEN 65346756
|
|
$2.23
Precio
|
$0.00
Depósito
|
+ Vendido en Paquetes de 1x1
Empacar
|
$2.23
Total
|
|
|
|
|
|
PROFESSIONAL PARTS SWEDEN ha sido un proveedor de piezas de recambio para los coches SAAB y Volvo durante los últimos 30 años. Su dedicado equipo de ingenieros e innovadores evalúa y prueba constantemente nuevas ideas para ofrecer repuestos de recambio de calidad. Además, algunos de los productos de ProParts fueron contratados directamente por SAAB para utilizarlos como piezas de recambio de equipos originales (OEM).
Sway Bar Bushing diameter can be within 1mm of your Sway Bar diameter. The clamping force of the bracket will account for the variance.
Cómo Determinar el Diámetro de Barra Estabilizadora To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.
- Use a digital caliper or micrometer for a precise reading
- Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
- Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.
Atención Clientes de California - ADVERTENCIA: Cáncer y Daño Reproductivo. www.P65Warnings.ca.gov
|
Fabricante Original de Equipo / Números de Intercambio: 4906756 |
PROFESSIONAL PARTS SWEDEN Información de Garantía:12 Meses/12,000 Millas |
|