Lesjöfors lleva más de 160 años fabricando muelles y produce ahora la mayor gama de resortes espirales del mundo para el mercado de recambios de automoción.

• Acero para muelles de calidad superior y pruebas de carga de cada lote para garantizar un alto nivel de calidad
• El tratamiento avanzado de la superficie con fosfato de zinc y pintura en polvo epoxi proporciona una mayor vida útil al minimizar la corrosión

Some original springs are manufactured using tapered spring wire - where the thickness of the steel reduces towards the end of the spring. This generally produces a weight savings but also increases the risk of premature spring failure.

To reduce the risk of premature failure, Lesjöfors springs are made from parallel spring wire, where the steel has a consistent thickness (diameter). To compensate, a Lesjöfors spring may need to be slightly shorter than a tapered wire OE. It is designed to fit the application and once fitted, will provide the correct spring rate, and ensure the vehicle sits at the correct ride height.