ENGINETECH
Mehr Informationen über ENGINETECH S2970
{Alternative Artikelnummern: S2970-20}
weiter einkaufen
 
ENGINETECH S2970  
($0.63/einzeln verkauft)
Preis
$0.00
Kühlernetz
+ In Sätzen von 20 verkauftx20
Verpackung
$12.60
Summe
ENGINETECH S2970close
Part image
ENGINETECH S2970 Spezifikationen
Cut Tool3-1443
Führung Außendurchmesser0.562 Zoll
Innendurchmesser0.562 Zoll
Einbauwerkzeug3-1686
MaterialViton
Außendurchmesser0.661 Zoll
Dichtung Länge0.433 Zoll
Gummidichtungsartpositiv-Metallverkleidung
Stem Outer Diameter0.366-0.388 Zoll
Ventilschaft Größe3/8 Zoll
Viton
Enginetech's high quality valve stem seals are available in three categories, Premium Positive, Premium Umbrella and OE.

Enginetech Premium Positive seals are metal clad with high-temp Viton® elastomer sealing lips. All Premium Positive seals are designed to work with valve stems from 0.005" under to 0.015" over. Most of these seals can be used as a universal fit on normal guide sizes such as 0.482", 0.500", 0.512", 0.530", 0.562, 0.625" etc. Stem diameters range from 8.00mm to 3/8".

Enginetech Premium Umbrella seals are high-temp Silicone with garter springs to retain stem interference. All Premium Umbrella seals are designed to work with valve stems from 0.005" under to 0.015" over. Most of these seals can be used as a universal fit on normal stem sizes such as 8.00mm, 5/16, 11/32" and 3/8".

Enginetech OE type seals are designed as a direct replacement for the OE part. The OE type seals are recommended for standard OE diameter valve stems only. We use only OE type materials for these seals including Viton©, polyacrylate and nylon. While many competitors use low quality nitrile materials Enginetech uses only OE material or better. We've got you covered with a full line of seals for your rebuilding requirements.

Why choose Enginetech Valve Stem Seals?


ENGINETECH Garantie Information:
originalzustand / Standard-Ersatz Produkte: 12 Monate / 12,000 Meilen; Hochleistung Teile: keine Garantie
Details zur Garantie