FVP
More Information for FVP 12166026
{Alternate Inventory Numbers: 121-66026}
Continue Shopping
 
FVP 12166026  
$42.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$42.79
Total
FVP 12166026close
<
>
Part image
FVP 12166026 Specifications
ABS Sensor Ring IncludedNo
Bearings IncludedNo
Center Hole Diameter (IN)5.409
Center Hole Diameter (MM)137.400
Disc MountingBehind the Hub
Discard Thickness (IN)1.465
Discard Thickness (MM)37.210
Mounting Bolt Hole Circle Diameter (IN)6.500
Mounting Bolt Hole Circle Diameter (MM)165.100
Mounting Bolt Hole Diameter (IN)0.646
Mounting Bolt Hole Diameter (MM)16.400
Mounting Bolt Hole Quantity8
Nominal Thickness (IN)1.539
Nominal Thickness (MM)39.100
Outside Diameter (IN)12.492
Outside Diameter (MM)317.300
Overall Height (IN)2.756
Overall Height (MM)70.000
Solid Or Vented Type RotorVented
Surface TypeSmooth
Vane StyleStraight
FVP Rotors are designed to meet OE performance criteria.

Features:
  • Symmetric vane, split-core castings for uniform heat distribution
  • Double disc ground friction surface for optimal performance and service life
  • Non-directional finish

Installation Tips
  • Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function



Attention California Customers - https://www.p65warnings.ca.gov/


Attention California Customers - WARNING: Cancer and Reproductive Harm


Warranty Information:
Limited Lifetime