|
CONTINENTAL 64421
|
|
$6.89
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$6.89
Total
|
|
|
|
|
|
| CONTINENTAL 64421 Specifications |
|---|
| End 2 Hose Inside Diameter | 0.25" | | Hose 1 Inside Diameter | 0.25" | | Hose 1 Length | 9.600" |
|
|
Continental Universal 90° molded heater hose is available for the applications where an exact fit molded heater hose is not available, or where a 90° form is required. With a combination of a Universal 90° hose, heater hose connectors, clamps and E-Z Coil, an exact fit hose may be closely replicated to function with the proper flow and routing.
Features & Benefits:
- EPDM tube and cover with synthetic knit reinforcement
- Resistant to Electrochemical Degradation
- Compatible with most coolants, including ethylene glycol- and propylene glycol-based coolants, as well as organic modified, long-life coolants
- Temperature range of -40°F to 275°F (-40°C to 135°C)
- Meets or exceeds SAE 20R3EC Class D1 and D2 specifications
 Signs it is Time to Replace Your Coolant Hose(s) Prevent system contamination and coolant leaks that could cause your engine to overheat by checking for these common signs of Coolant Hose damage / failure:
| INTERNAL DAMAGE |
|
Soft / mushy hose ends, usually about 2 inches from the clamp.
 Internally Damaged Hose |
| LEAKAGE |
|
Moisture, drips or coolant bleed marks on or around the hose clamps, connectors or hose.
 Leaking Hose |
| HEAT DAMAGE |
|
Slight swelling, or a hardened, glossy cover that is covered with cracks.
 Heat Damaged Hose |
| OZONE DAMAGE |
|
Tiny, parallel cracks in the cover, usually at hose bends.
 Ozone Damaged Hose |
| ABRASION DAMAGE |
|
Rubbing marks on, or damage to the hose cover.
 Abrasion Damaged Hose |
| OIL CONTAMINATION |
|
Soft or spongy to the touch - bulges and swelling are readily apparent.
 Oil Contaminated Hose |
Attention California Customers - N
|
CONTINENTAL Warranty Information:12 Months |
|
