EDELMANN
More Information for EDELMANN 80448
Continue Shopping
 
EDELMANN 80448  
$15.30
Price
 $0.00
Core
 + Sold in packs of 1x1
Pack
 $15.30
Total
Add to Cart
EDELMANN 80448close
<
>
Part image
EDELMANN 80448 Specifications
Length (IN)39
End 1 Diameter (MM)16
End 1 TypeMale O-Ring
End 2 Diameter (IN).375
End 2 TypeI.D. Hose
  • Hypalon Pressure Hose Construction
    Hypalon hose is a more advanced, higher performance hose used by GM and Ford since 1980.
  • Pro-Coated or Terne-Coated Tube Ends
    Edelmann hoses have pro-coated or terne-coated tubing ends.
  • Double-Bead Lock Crimps
    A double-bead lock crimp design prevents leakage due to its solid tube-to-shell connection.
  • Mounting Brackets
    Edelmann hoses are supplied with moveable mounting brackets to aid in hose installation.
  • Heat and Abrasion Guards
    Flexible, high-temperature guards are used to protect the hose cover from engine hot spots.
  • High-Temperature Silver Heat Guards
    This special high-temperature guard is used to protect the hose cover on late-model vehicles where the OE hose passes close to, or actually touches the exhaust system.
  • Fluid Restrictors
    To ensure a quietly functioning power steering system, some OE hoses have "built-in" restrictors.
  • Switch Sockets
    Recently, OE manufacturers have incorporated switches into the power steering pressure hose. These switches serve to either speed-up the engine idle or cut-off a compressor.
  • Banjo-End Lock Tabs
    Many late-model import vehicles that use banjo-end fittings are equipped with "lock tabs." These tabs are designed to limit the possibility of the hose end from loosening due to engine vibration and twist.
  • Original-Style Fittings
    Edelmann couplings and fittings are manufactured with heavy-gauge metal and are zinc-dichromate plated to resist corrosion for a longer service life and a high-quality appearance.
Hydroboost uses the pressure of the Power Steering Pump to power the Brake Booster. This is denoted by a third port on the Power Steering Pump and hoses that connect the pump to a brake unit behind the master cylinder.
Installation Tips
  • Replace all power steering hoses at the same time, to prevent system contamination
  • Completely flush the system with an OE approved Power Steering Fluid prior to installation (the correct type of fluid is noted on the reservoir cap or in your owner's manual). Flushing the system is critical to prevent system contamination and failure
  • Install the replacement hose in reverse order of how it was removed, making sure to install any included o-rings. Lubricate the o-rings with Silicone Grease and carefully install them, to prevent damage. Make sure the hose is not touching or rubbing against any components that vibrate or give off heat
  • Consider installing a Power Steering Filter on the Power Steering Return Hose to prevent system contamination and extend the life of the power steering components

Attention California Customers - WARNING: Using this product can expose you to 1,3Butadiene, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. Wash hands after handling. (18)


EDELMANN Warranty Information:
Elite Power Steering Pumps, Rack & Pinions, Steering Gears: 100 Years / 1,000,000 Miles; Elite Hoses: Limited Lifetime; Non-Elite Hoses and Fittings: 12 Months