|
TRANSGO SK700
|
|
$62.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$62.79
Total
|
|
|
|
|
|
| TRANSGO SK700 Specifications |
|---|
| Installation Note | Transmission Removal Not Required |
|
|
| Shift Kit; For 700R4, 4L60 Transmissions |
| This TransGo 700 SHIFT KIT® Valve Body Repair Kit fits 1982 to 1993 General Motors vehicles equipped with the 700R4/4L60 automatic transmission. This kit was designed for 1982-1987 units with a type-1 valve body; however, it will fit all year models and valve body types. If you have a 1988 or later type-2 valve body, you can use the more economical “junior kit”, part # SK700JR to achieve the same results.
Common complaints and failures of this transmission are: 2-4 band and 3-4 clutch failure, 1-2 slide bump, 2-3 cut-loose, low/reverse clutch failure, no 4th or falling out of 4th as well as 4-3-4-3 shuttle shifts and the infamous 3-2 coast downshift bang with the lever in the D3 range.
Features & Benefits:
The kit features TransGo's patented Bootstrap® TV system that addresses the root cause of the band, 3-4 clutch, late and early shift failures by providing an all new TV system. In addition, this kit provides specifically calibrated components to work with the new TV system and address the other complaints. Lastly, they have included an optional torque converter lock-up without wiring or electrical for 1982 to 1987 valve bodies that are equipped with OE valving or dummy plugs.
Corrects/Prevents/Reduces:
- TV that won't adjust properly causing band and clutch failure, late shifts or early shifts
- Sticking TV valve
- 2-4 band failure
- 3-4 clutch failure
- Soft or slide-bump 1-2 shift
- 2-3 cut-loose
- Falls out of 4th gear
- Shuttle 4-3-4-3
- Soft, late or no 4th
Includes:
- No Stick TV valve, springs, spacer and aluminum washer
- Pressure regulator valve spring, snap ring
- Orifice cup plug
- (4) Governor springs
- (4) Accumulator seals
- (2) 1-2 accumulator springs
- 1-2 accumulator spring seat
- Servo cushion spring and shim (for band adjustment)
- .076” drill bit
- 3-4 accumulator spring
- (2) 1-2 TV valve springs
- 2-3 TV valve spring
- (6) 3-4 TV valve springs
- (4) Converter TV valve springs and spacer
- MTV up valve spring
- (3) Accumulator valve springs and wire clip
- (2) Line bias valve springs
- 3-2 control valve spring
- 5/16” steel checkball
- 5/16” plastic checkball
- (2) Valve body gaskets
- Roll pin extractor tool
TransGo Shift Kit vs. Reprogramming Kit
Shift Kit® -- DESIGNED FOR DURABILITY
TransGo Shift Kit® valve body repair kits correct, prevent and reduce multiple transmission problems such as shift irregularities and durability issues. These kits are designed for normal everyday use and light duty towing.
Reprogramming Kit -- ENGINEERED FOR PERFORMANCE
TransGo Reprogramming Kit™ valve body performance kits are made for Heavy Duty and/or Performance applications, and include additional features such as:
- Gear Command™: Allows full control of downshifting and will hold any gear to any RPM. Retains automatic up shifts in the drive position. Certain units allow manual up shifts on driver command.
- Manual Shift Control: This feature fully converts the valve body to manual/stick shift operation – no automatic shifts. Most Manual Shift Control kits also allow you the ability to easily convert back to automatic.
- Tuneless: Patent-pending internal calibration technology “tuneless” allows install without the need for additional transmission tuning software or programmers.
What is a Shift Kit?
TransGo Shift Kit® valve body repair kits are a combination of new and re-engineered components that are primarily installed in the valve body, but sometimes the pump or even in the transmission itself. These kits solve a variety of inherent problems and weaknesses that differ by transmission model, including usual warp and wear, often allowing a higher mileage transmission to work better than a new one. Typical components of a valve body repair kit include springs, valves, check balls, gaskets, separator plates, etc.
 TransGo Technical Support If you are having trouble choosing the correct TransGo part, or have questions before, during or after installation of this part, TransGo's ASE Certified Technicians are available to help.
📞 Phone: 626-443-7451 (7:00am-4:00pm PST M-F)
📧 Email: support@transgo.com
|
TRANSGO Warranty Information:12 Months |
|
