Sous-dimensionné de 0.020" (seulement 1 restant(s)) ($79.79)
Standard($79.79)
Sous-dimensionné de 0.030"($81.79)
Sous-dimensionné de 0.001"($85.79)
Sous-dimensionné de 0.011"($85.79)
Sous-dimensionné de 0.021"($85.79)
Sous-dimensionné de 0.010" (en rupture de stock)
KING ENGINE BEARINGS CR807HPND
Passer la souris sur l'image pour agrandir
Set; Bimetal; Alecular (Racing Line)
King HP-Series rod bearings, featuring the Alecular metal structure, were developed mainly for drag race applications needing a material harder than the Babbitt top layer. These applications demanded a structure that could withstand high loads for short durations and still offer higher embeddability and compatibility. In response, King developed the HP-Series featuring the Alecular metal structure.HP Series Alecular bearings are particularly suitable for the following cases:
When a tri-metal bearing's Babbitt overlay extrudes over the sides, migrates to one end, or is physically removed by the crankshaft
When the intermediate layer of a tri-metal bearing is exposed, damaging the crank journal and requiring expensive grinding or replacement
When contaminants enter the oil stream, scratching and damaging the crankshaft journals