HUSKY SPRING USB013S
|
|
$14.49
Precio
|
$0.00
Depósito
|
+ Vendido en Paquetes de 1x1
Empacar
|
$14.49
Total
|
|
|
|
Especificaciones de HUSKY SPRING USB013S |
---|
Curva Forma | Cuadrado | Grado de Pernos | Grado 8 | Color | Acero Gris | Contenidos | 1 Perno en U, 2 tuercas, 2 Arandelas por Juego | Tuercas Profundas y Grosor Endurecido Arandelas Incluido | Sí | diámetro (pulg.) | 5/8 | Material | Acero | Longitud Total (Pulg.) | 8-5/8 | Contrahuela bloquea Incluido | No | Forma | Cuadrado | Tamaño de Rosca | 5/8-18 Roscas por pulgada | Tipo de Rosca | NF | Perno en U Incluido | Sí | Ancho (pulg.) | 2-9/16 |
|
|
Qty 1 Steel U-bolt with 2 deep nuts and 2 thick hardened washers. Two kits needed per spring.
![](/genImages/96/uboltTorque.jpg)
Important note: Always retorque newly installed u-bolts after 20 miles of service. If they have lost noticeable torque, retorque again after 1 day. Continue rechecking until the u-bolts hold torque. (Loss of torque value is usually from settling of the stack of components being clamped together) This is a very important practice because loose u-bolts will cause spring breakage through the center hole, possible shifting of the axle with resulting damage and safety issues!
|
Información de Garantía:No Tiene Garantía |
|