MOOG
More Information for MOOG K90524
Continue Shopping
 
MOOG K90524close
Part image
MOOG K90524 Specifications
Bar Diameter (Inch)0.520
Height (Inch)1.550
Includes HardwareNo
Inner Diameter (Inch)1.100
Length (Inch)1.496
MaterialRubber
Outer Diameter (Inch)1.260
Quantity of Bushings2
Features:
  • Split design allows for easier installation
  • Restores like-new steering and handling
  • Bushings are engineered to provide long life and dependability
  • Inner sleeve is phosphate coated for corrosion protection
Sway Bar Bushing diameter can be within 1mm of your Sway Bar diameter. The clamping force of the bracket will account for the variance.
How To Determine Stabilizer (Sway) Bar Diameter

To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.

  1. Use a digital caliper or micrometer for a precise reading
  2. Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
  3. Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.

OEM / Interchange Numbers: 4881030010, 4881830100, 4881853030, 5501373

Warranty Information:
Limited Lifetime