|
DYNAMIC FRICTION 4000225700
|
|
$26.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$26.79
Total
|
|
|
|
|
|
| Brake Pads are sold as a set. Quantity of one (1) is for both wheels |
| DYNAMIC FRICTION 4000225700 Specifications |
|---|
| FMSI Number | 9494-D2257 | | Friction Material Attachment | Integrally Molded | | Friction Material Composition | Hybrid | | Inner Pad Height | 3.193 in | | Inner Pad Width | 5.154 IN | | Mounting Hardware Included | No | | Outer Pad Height | 3.193 in | | Outer Pad Width | 5.154 IN | | Pad Wear Sensor Included | No | | Pad Wear Sensor Type | Electronic | | Prepared For Pad Wear Sensor | Yes |
|
|
The DFC HybriDynamic brake pad formulation is designed to deliver a consistent pedal feel and superb brake response at a great value, taking the guesswork out of choosing the right brake pad material. Not only does the DFC 4000 HybriDynamic Brake Pad provide superior performance for enhanced safety, but it also boasts low dust and low noise characteristics.
 Installation Tips - Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
- Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
- Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
- Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
- After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Attention California Customers - This product contains Antimony Oxide and other chemicals which is known in the State of California to cause cancer ( or reproductive problems).
|
DYNAMIC FRICTION Warranty Information:12 months/12,000 miles |
|
