Brake Pads are sold as a set. Quantity of one (1) is for both wheels
DYNAMIC FRICTION 1400082501 Specifications
FMSI Number
7697-D825
Friction Material Attachment
Integrally Molded
Friction Material Composition
Hybrid
Inner Pad Height
2.953 in
Inner Pad Overall Thickness
0.787 in
Inner Pad Width
8.11 IN
Mounting Hardware Included
Yes
Outer Pad Height
2.953 in
Outer Pad Overall Thickness
0.787 in
Outer Pad Width
8.11 IN
Prepared For Pad Wear Sensor
No
Ultimate Duty
Installation Tips
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Attention California Customers - This product contains Antimony Oxide and other chemicals which is known in the State of California to cause cancer ( or reproductive problems).
DYNAMIC FRICTION Warranty Information:12 months/12,000 miles