DELPHI TD5535W
|
|
$9.53
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$9.53
Total
|
|
(Only 1 Remaining)
|
|
DELPHI TD5535W Specifications |
---|
Color | Black | Height (MM) | 57.25 | Inside Diameter (MM) | 25.8 | Material | Rubber | Position(s) | Front To Frame | Width (MM) | 31.0 |
|
|
Thanks to their good damping properties and excellent load carrying capabilities, Delphi Technologies bushings absorb unwanted vibrations and sound, providing a comfortable and quiet ride, as well as improving vehicle stability and safety.
Since bushings are subject to high dynamic stresses day-in, day-out, Delphi Technologies only ever uses the highest quality materials. By carefully balancing the precise quantities of steel and rubber, Delphi Technologies bushings provide the optimum combination of strength, flexibility and noise reduction, tailored to the application they fit.
Sway Bar Bushing diameter can be within 1mm of your Sway Bar diameter. The clamping force of the bracket will account for the variance.
![](/Images/MoreInfo/install.png) How To Determine Stabilizer (Sway) Bar Diameter To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.
- Use a digital caliper or micrometer for a precise reading
- Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
- Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.
![](/genImages/diaMeasureAll.jpg)
Attention California Customers - WARNING: This product can expose you to chemicals including Carbon Black, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
|
OEM / Interchange Numbers: 4R3Z5493AA |
Warranty Information:Limited Lifetime |
|