DELPHI TA5092
|
|
$14.65
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$14.65
Total
|
|
|
|
DELPHI TA5092 Specifications |
---|
Adjustable | No | Bearing Material | Polyoxymethilen (POM) | Color | Black | Cone Outside Diameter (IN) | 0.54 | Cone Outside Diameter (MM) | 13.7 | Dust Boot | Yes | Dust Boot Material | Choloroprene Rubber (CR) | End 1 Gender | Male | End 1 Thread Diameter (IN) | 0.472 | End 1 Thread Diameter (MM) | 12.0 | End 1 Thread Direction | Clockwise (Right) | End 1 Thread Pitch (MM) | 1.25 | End 2 Gender | Male | End 2 Thread Diameter (IN) | 0.63 | End 2 Thread Diameter (MM) | 16.0 | End 2 Thread Direction | Clockwise (Right) | End 2 Thread Pitch (MM) | 1.5 | Finish | Coated | Grade | Standard | Grease Fitting Included | Yes | Height (MM) | 86.1 | Housing Material | Steel | Length (MM) | 176.3 | Length Stud Center to End (IN) | 2.2 | Length Stud Center to End (mm) | 56.0 | Mounting Hardware Included | Yes | Position(s) | Inner | Pre Greased | Yes | Stud Type | Threaded | Tie Rod Material | Steel | Type | BENT | Weight (lb) | 1.43 | Width (MM) | 46.5 |
|
|
Features:- Extensive dimensional and material analysis to ensure the very best compatibility to the Original Equipment (OE) part
- Tested alongside the OE part for 250,000 cycles to check braking force, cornering force and suspension travel movement, to ensure the part performs like the OE
- Able to withstand temperatures below -40ºC and over 120ºC, helping to ensure they perform even under the harshest conditions
- Parts exposed to 720 hours of salt spray for optimum protection against corrosion
- Additional cataphoretic coating for greater protection against corrosion and enhanced aesthetics
Attention California Customers - WARNING: This product can expose you to chemicals including Carbon Black, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
|
Warranty Information:Limited Lifetime |
|