Transmission Oil Cooler Distance between Fittings (IN)
11 1/2
Transmission Oil Cooler Plate Quantity
7
Engine Oil Cooler Included
Yes
Oil Cooler Fittings Distance Apart (IN)
11 1/2
Engine Oil Cooler Type
PLATE
Engine Oil Cooler Number of Plates
5 PLATES
Features & Benefits
Drop in fit, form and function for hassle-free installation
All necessary hardware or fittings are included in each unit
100% Leak Tested
Premium grade tubes, fins, headers, tanks, and other components
Components are fitted and torqued in place to factory specifications
Service Tip: If you are experiencing unexplained or reoccurring radiator core leaks, or notice dark spots on your failed radiator core, test your coolant for Electrolysis. If detected, correct the source of the problem before replacing your failed radiator to prevent repeat failure.
OSC's Testing Process
Cycle testing - flowing preheated fluid through the unit as the pressure is raised and decreased to imitate driving conditions a minimum of 30,000 cycles.
Vibration testing - used to simulate pot holes, curbs and off-road use.
Burst testing - the gradual increase of pressure until the unit fails pointing out the weakest area of the unit.
Environmental testing - salt and chemical spray imitating road conditions found driving during winter and coastal conditions.
Measurement Guide
Cooling System Maintenance | Tips & Tools
Without regular maintenance, cooling system components will degrade and fail prematurely, which can lead to costly engine damage. Protect your engine with simple preventative maintenance:
Completely drain and flush the system using Cooling System Flush prior to installation. Flushing the system is critical to prevent system contamination and failure.
Consider replacing the Radiator Hoses (and Hose Clamps), Thermostat and Radiator Cap as part of routine preventative maintenance. System contamination can cause these parts to degrade and fail over time, which can lead to severe engine damage from overheating.
Refill radiator with fresh Coolant / Antifreeze according to the volume and formula specified in your Owner's Manual. Inspect levels and condition every year.
Cooling System Maintenance | Tips & Tools
Videos