Mopar parts have been engineered exclusively for Chrysler, Dodge, Jeep, Ram, FIAT and Alfa Romeo vehicles. Use authentic Mopar parts and your vehicle will provide a safe and reliable ride...no matter where the road of life takes you. Quality is a starting point, not an afterthought. Mopar designs parts that exceed wear and tear.
Sway Bar Bushing diameter can be within 1mm of your Sway Bar diameter. The clamping force of the bracket will account for the variance.
How To Determine Stabilizer (Sway) Bar Diameter
To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.
Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.
Videos
Why Choose Mopar OE Parts
Attention California Customers - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
How To Determine Stabilizer (Sway) Bar Diameter
Videos