VNE
More Information for VNE 8211
Continue Shopping
 
VNE 8211  
Out of Stock
Price
Core
Pack
Total
VNE 8211close
<
>
Part image
VNE 8211 Specifications
Bolt Hole Quantity5
Height (MM)43.7
Nominal Thickness (MM)32.0
Outside Diameter (MM)356.0
Rust Resistant CoatingYes
Solid Or Vented Type RotorVented
VNE Automotive offers original equipment parts specializing in European and Asian vehicle applications.

Rotor Features:
  • Eco friendly UV Coating inhibits rust and corrosion
  • Minimal wear rate for an extended lifespan
  • Shiny and clean look
Installation Tips
  • Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function


OEM / Interchange Numbers: 4S0615601B

VNE Warranty Information:
12 Months