DEA / MARMON RIDE CONTROL
More Information for DEA / MARMON RIDE CONTROL A2638
Continue Shopping
 
DEA / MARMON RIDE CONTROL A2638  
$6.31
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$6.31
Total
DEA / MARMON RIDE CONTROL A2638close
<
>
Part image
DEA / MARMON RIDE CONTROL A2638 Specifications
Bracket MaterialSteel
Bushing MaterialRubber
Mount MaterialSteel, Rubber
Mounting Bracket IncludedYes
Mounting Hardware IncludedNo
Mounting Hole Quantity2
Per Vehicle Quantity1
Stud Quantity2
TypeSolid
Marmon Ride Control (formerly DEA Products) has been a trusted manufacturer of engine and transmission mounts for over 30 years. Marmon Ride Control uses the highest quality of raw materials available, and thoroughly tests their products with state-of-the-art lab equipment to ensure that you'll be installing a mount that will meet or exceed your original mount's specifications.

Testing Includes:
  • Visual Inspection
    • Visual / Finish
    • Paint / Rubber Appearance
    • Weld Integrity
  • Dimensional Verification
    • Dimensions tested / approved using CMM (machine which takes readings in six degrees of freedom and displays these readings in mathematical form)
  • Elastomer / Durometer Tested
    • Rubber Hardness Check
    • Every shipment inspected thoroughly
    • Supplier verification on site
  • Rubber Tensile Strength tested
    • Strip sample and test of rubber processing
    • Supplier must submit test report and sample from every batch
    • On-site audits to verify process capabilities
  • Thermogravimetric Analysis
    • TGA / Rubber Compression Tests (changes in physical and chemical properties of mount materials are measured as a function of increasing temperature (with constant heating rate), or as a function of time (with constant temperature and/or constant mass loss))
    • Rheometer / Vulkameter tested (measure the way rubbers respond to applied forces)
    • Supplier must submit test report and sample from every batch
    • On-site audits to verify process capabilities

Tips & Tools For The Repair
  • Inspect Motor Mounts (found in the "Engine" category) for signs of wear. Transmission and Motor Mounts typically wear at the same rate
  • The original mount bolts can be difficult to remove. Apply Penetrating Oil and have a Breaker Bar handy to help break them loose
  • Find a solid part of the transmission to place the Jack under. Do not use the fluid pan, it is not strong enough to support the weight of the transmission
  • Apply Blue Threadlocker to mount bolts prior to installation to prevent backing out due to the high vibrations transmission mounts are subject to
OEM / Interchange Numbers: 15022551, 15031704, 15113134, 15171918, 15683966, 15750514, 15840277, 15840278, 15840279, 15931534, 25814766, 5468, 8151719180

DEA / MARMON RIDE CONTROL Warranty Information:
Limited Lifetime