TRANSGO
Mehr Informationen über TRANSGO SK6R80
{Alternative Artikelnummern: K116908}
weiter einkaufen
 
TRANSGO SK6R80  
$87.79
Preis
$0.00
Kühlernetz
+ In Sätzen von 1 verkauftx1
Verpackung
$87.79
Summe
TRANSGO SK6R80close
<
>
Part image
TRANSGO SK6R80 Spezifikationen
Installation NotizGetriebe Entfernung nicht erforderlich
Schaltungssatz; für 6R60/75/80 und ZF6-HP19, 26, 32 GEN1 Getriebe
This TransGo 6R80 SHIFT KIT® Valve Body Repair Kit fits 2006-14 Ford vehicles equipped with a GEN1 6R60, 6R75 and 6R80 transmission, as well as 2003-up BMW, Audi, VW, Aston Martin, Rolls-Royce Maserati, Hyundai, Kia and Jaguars vehicles equipped with ZF6HP19, ZF6HP26 and ZF6HP32 GEN1 valve body. This kit does not fit ZF6HP21, ZF6HP28 or ZF6HP34 with a GEN2 valve body.

Common concerns with this transmission are TCC shudder, rough coast down shifts, gear ratio error and solenoid performance codes. Firstly, these complaints are the result of the wear in the pressure regulator (PR) valve bore and the pressure regulator valve balance bushing. Secondly, the torque converter clutch regulator valve design and calibration were in dire need of an upgrade to address the TCC shudder complaint.

Features & Benefits:
This kit includes a hardened steel drop-in two-piece pressure regulator and a redesigned TCC regulator valves for a quick no-hassle install. Our drop in valves require no reaming or tooling.

Both the redesigned drop-in steel PR valve and TCC regulator valve, feature longer lands which restores the hydraulic integrity of the circuit by utilizing previously unused and therefore unworn areas of their bore. Furthermore, the longer lands increase bore longevity by redistributing the load over a greater surface area. The kit also includes new rubber dampener inserts that flatten out over time and new wire retainer clips to replace the occasional broken one.

Corrects/Prevents/Reduces:
  • Gear ratio codes: P0731, P0732, P0733, P0734, P0729
  • Shift error codes: P0781, P0782, P0783, P0784, P0829
  • 28-46 MPH TCC shudder due to TCC regulator malfunction
  • Erratic pressure due to PR valve malfunction
  • Soft or long shifts
  • TCC slip
  • Coast downshift clunk
Includes:
  • (1) Drop-in USA-made hardened steel PR valve
  • (1) PR valve spring
  • (2) USA-made aluminum PR valve boost bushings
  • (1) Drop-in USA-made hardened steel TCC regulator valve
  • (2) TCC calibration springs, import and domestic
  • (4) New wire retainers
  • (6) New dampener rubber inserts
For high mileage vehicles:
If you have a valve body with a lot of miles on it, you may still get a persistent coast-down clunk or slip-sliding shifts when hot. Those valve bodies will need to have the solenoid regulator and lube regulator bores reamed in order to fully restore the hydraulic integrity of the circuits. TransGo offers two kits to do it, one with tools and one without. The kit with tools includes two guides and a reamer that can be used on both bores, if you already have the tools, you can buy just the valves and springs.

TransGo Shift Kit vs. Reprogramming Kit

Shift Kit® -- DESIGNED FOR DURABILITY

TransGo Shift Kit® valve body repair kits correct, prevent and reduce multiple transmission problems such as shift irregularities and durability issues. These kits are designed for normal everyday use and light duty towing.

Reprogramming Kit -- ENGINEERED FOR PERFORMANCE

TransGo Reprogramming Kit™ valve body performance kits are made for Heavy Duty and/or Performance applications, and include additional features such as:

  • Gear Command™: Allows full control of downshifting and will hold any gear to any RPM. Retains automatic up shifts in the drive position. Certain units allow manual up shifts on driver command.
  • Manual Shift Control: This feature fully converts the valve body to manual/stick shift operation – no automatic shifts. Most Manual Shift Control kits also allow you the ability to easily convert back to automatic.
  • Tuneless: Patent-pending internal calibration technology “tuneless” allows install without the need for additional transmission tuning software or programmers.

Was ist ein Schaltungssatz?
TransGo Shift Kit® Ventilkörper-Reparatursätze sind eine Kombination aus neuen und überarbeiteten Komponenten, die hauptsächlich im Ventilkörper, manchmal aber auch in der Pumpe oder sogar im Getriebe selbst eingebaut werden. Diese Kits beheben eine Vielzahl von typischen Problemen und Schwachstellen, die sich je nach Getriebemodell unterscheiden, wie z. B. die üblichen Verformungen und Abnutzungserscheinungen, und ermöglichen oft, dass ein Getriebe mit höherer Laufleistung besser funktioniert als ein neues. Typische Bestandteile eines Ventilkörper-Reparatursatzes sind Federn, Ventile, Rückschlagkugeln, Dichtungen, Trennplatten, etc..

TransGo Technischer Support

Wenn Sie Probleme bei der Auswahl des richtigen TransGo-Produkts haben oder vor, während oder nach der Installation dieses Produkts Fragen haben, stehen Ihnen die englischsprachigen ASE-zertifizierten Techniker von TransGo zur Verfügung.

📞 Telefon: +1.626.443.7451 (M-F 7:00-16:00 PST/UTC-8)
📧 E-Mail: support@transgo.com


Erstausrüstung / alternative Artikelnummern: T49165A

TRANSGO Garantie Information:
12 Monate