• Made from high-quality natural rubber material for durability and ride performance
• Optimized for quiet operation and resistance to wear, salt, road grime and oils
• Rigorous Testing -- Comprehensive testing throughout design and development process for quality you can count on

How To Determine Stabilizer (Sway) Bar Diameter

To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.

1. Use a digital caliper or micrometer for a precise reading
2. Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
3. Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.